Overhead to Underground Conversion North Shore
A new cable in the ground from the Ausgrid network to your meter board, with the overhead line removed for good.
The North Shore’s tall trees are its signature: blue gums, turpentines and Sydney red gums along the streets and through the gardens of Pymble, Wahroonga, Turramurra, St Ives and Lindfield. They’re also the reason so many service lines come down in storms. Add the fact that a black wire across the front of a Federation or Arts and Crafts home is nobody’s idea of a heritage feature, and it’s no surprise undergrounding is one of our most requested jobs. An overhead to underground conversion replaces the overhead line with a cable in conduit under the ground.
Why North Shore owners go underground
- Trees and storms. Limbs from tall gums bring down service lines every storm season.
- Heritage facades. Removing the line and bracket restores the street view of a period home.
- Renovations. Second storeys, attic conversions, pools and pavilions clash with overhead lines.
- Private poles. Long and battle-axe blocks lose their private pole and line altogether.
- Bush edges. Homes on the Ku-ring-gai bush edges remove an overhead line from the fire risk.
How the connection works
Most North Shore streets are supplied by overhead Ausgrid mains on poles. The usual method is to run the new cable to the base of the nearest suitable pole and up it in a protective conduit to the mains. Some streets and newer developments have underground mains with a pit near the boundary. We confirm the method and any Ausgrid requirements before quoting.
Digging in North Shore gardens
North Shore gardens are often established and valued: azaleas and camellias, sandstone walls and steps, old paving and mature trees. Sandstone sits close to the surface on many ridges. We plan the route to avoid significant trees and walls, hand dig near roots and footings, saw-cut sandstone where we can’t avoid it, and restore the garden as we go. For protected trees, we can coordinate with your arborist.
While the trench is open, size the cable for the future. A three phase power upgrade or larger single phase cable for an all-electric home costs little extra now.
Connection day
We lodge the notification with Ausgrid, isolate the supply, pull through and terminate the new cable, test and restore power. The old overhead line, bracket and any private power poles are removed. You get a certificate of compliance.
Heritage homes
Removing an overhead line usually improves a heritage home’s street presentation. Where the new cable rises to the meter board, we keep conduit discreet and paint it to match.
Rebuilds
On a knockdown rebuild, plan the underground supply with the builder from the start. Site power comes from a temporary builders supply.
How long it takes
Trenching usually takes a day or two depending on the garden and rock. Connection is a separate visit.
Lower North Shore
In Crows Nest, Neutral Bay and Cremorne, front gardens are small and supplies often come in at the front parapet or from a rear lane. Undergrounding is still possible but needs careful planning.
Get a quote
Call the North Shore level 2 electrician team to walk the garden and get a fixed written price. We’ve taken many homes underground in level 2 electrician Pymble and Wahroonga.
Updated
What good overhead to underground conversion looks like
Overhead to Underground Conversion questions on the North Shore
Something else on your mind? Call 02 9158 9919 and ask.
Will the trench damage our tree roots?
We route around significant trees and hand dig near roots. For protected trees, we can work with your arborist on the route.
Does undergrounding need council approval?
Usually not for the supply itself, but work near protected trees or changes in heritage areas may need checking. We'll flag anything that might.
How long is the power off?
Only on connection day, usually for a few hours.
Overhead to Underground Conversion on the North Shore: step by step
- Walk the gardenWe plan the route from the street to the meter board around trees, walls, paths and beds.
- Confirm with AusgridWe confirm the connection method, usually up the nearest street pole or at a pit.
- Trench with careHand digging near roots and walls, conduit at depth, marker tape, garden restored.
- Connect and clearNew supply connected and tested; the overhead line, bracket and any private pole removed.
Overhead to Underground Conversion guides for North Shore homeowners
- Undergrounding power on the North Shore: costs, trees, heritage and what to expectWhy so many North Shore owners put their supply underground, how it's done around trees, gardens and heritage homes, and what drives the cost.
- Heritage home power upgrade on the North Shore: modern supply, original characterHow to bring the supply of a Federation, Arts and Crafts or heritage-listed North Shore home up to modern standards without spoiling its character.